Are You Making These 5 Big Mistakes when it Comes to growing with LED Light? - SEVEN COLORS LIGHTING CO.,LTD

Are You Making These 5 Big Mistakes when it Comes to growing with LED Light?

LED grow lights are known for their energy efficiency and low cost of operation. However, this popularity has also led to a lot of negative press regarding the efficacy of these devices. In this article I’m going to list some of the most common mistakes growers make when they use LED lighting.

LED lighting, once seen as the next big thing in plant growth, has slowly been falling out of favor. With more efficient LED lights on the market and less energy required than ever before, there is nothing holding back plant growth like once thought. However, with all the advancements we’ve made in plants over the years, are we making the same mistakes when it comes to growing with LED lights?

led grow light 1000w

LED Grow Light 1000W Full Spectrum

LED Grow Light 1000W is specially designed for big garden, bulk indoor agricultural growth, and big project farming.

Section: Not providing the right spectrum

When it comes to growing with LED light, spectrum is the most important factor. The right spectrum of light is what makes plants grow and flowers bloom. If you use the wrong spectrum of LED lights, or if you don’t know what the right spectrum is, then your plants will suffer.

While there are many different types of LED lights on the market today, they all come in a range of spectrums. You can find both cool white and warm white LEDs as well as various colors including reds, yellows and oranges. The most common spectrums for commercial grow lighting are white and blue which are great for flowering plants.

The best spectrum for growing cannabis plants is a mix of cool white and blue LEDs because they provide both PAR and lumens at a reasonable price point while also maintaining cooler temperatures than warm white or red light sources do. Cool whites produce more PAR than blue LEDs but less lumens than warm whites do so they have less heat output than either warm or cool whites do when compared to their respective lumen outputs.

Section: Going for cheap

LED lights are usually the cheapest option when it comes to growing, but this does not mean that you should go for the cheapest LED grow light. LED grow lights come in different sizes, prices and even quality. There is no one size fits all solution when it comes to LED lights. You need to find out what type of plant you are growing and then choose a suitable light source based on that.

If you are growing plants like cannabis or hydroponic tomatoes, then you will need high-intensity lights which can produce up to 800 watts per square meter. If your plants are smaller and more delicate, then high intensity may not be necessary. In this case, low-intensity LEDs may be just fine as they tend to be cheaper than high intensity ones.

Here are some things to look out for when buying LED lights:

Brand – Look for brands that have a good reputation for building quality. Don’t buy from eBay or Alibaba as these are often fake or poor quality products.

Size – If you have a small space, consider going for smaller lights rather than larger ones. Smaller LEDs tend to be cheaper than larger ones and give off less heat, which is important when growing indoors.

Wattage – The wattage of an LED light refers to the amount of energy used by each individual bulb. It’s measured in Watts (W), which is influenced by the length of each filament inside the bulb and how hot it gets when powered on (see below).

Section: Over-driving the LEDs

One of the biggest mistakes made when it comes to LED grow lights is over-driving them.

The key issue with LED grow lights is that they don’t provide all the energy needed for your plants to thrive, so you need to make sure you have a way to feed them during the day and at night.

If you don’t, your plants will suffer. They may not die immediately, but they will become weaker and eventually die out completely.

Section: Attaching the LED directly to your plant

This is a mistake that many people make. It’s important to note that the LED light should not be directly attached to the plant. In order to ensure proper growth and health, you need to make sure that the light is placed at least 4 inches above your plants. This will ensure that there are no shadows cast on them by the light below it.

Section: Buying a cheap driver

Buying a cheap driver is not a good idea. A cheaper driver is more likely to burn out sooner and be more prone to failure. While you can still use the cheaper one for a short time and then get another one, this is not a good solution for long-term LED lighting.

The mistake people make when it comes to LED grow lights is not buying enough of them. This is usually because they just don’t know how much light they need to get the job done.

When you’re starting out, you can use any old driver that you find in your garage or shed. But if you want to grow more plants with fewer watts and less heat, then you need to buy an upgraded driver. The good news is that there are plenty of options available.

Takeaway: Your LED grow lights will produce better results if you take each of these steps into consideration.

Growing a garden has never been easier for the average person, but whether you are growing inside or outside, there are still many factors to consider. As discussed above, proper lighting can be especially challenging and needs to be addressed from the start of your plant’s life. Give some attention to these five tips before diving into your next grow session and you may be surprised at the results.

LED Grow Light Manufacturer

As a professional led grow light manufacturer in China, we have more than 10years experience on led grow strip lights.

The above mistakes people make when it comes to growing weed indoors with LED grow lights. These mistakes can be expensive and time consuming to resolve. We compiled this list of five common mistakes to help people understand the simple steps required in order to get the full benefit out of their investment in an LED grow lamp.


Leave a Reply